San Francisco Bay Area, CA
Facebook Instagram

How to Make a Wind Chime from Found Shells and Driftwood

A wind chime made from beachcombed shells and weathered driftwood carries more than a sound. Each curved shell catches the breeze differently, while salt-softened wood adds a warm, earthy base. The result can hang beside a deck, in a courtyard, or near an open window and become a daily reminder of the coast. For children, the project also offers a quiet lesson in observation: noticing which shells are heavy, which branches are balanced, and how small changes in air movement alter a familiar sound.

Begin with one simple design rather than attempting a large mobile. A short piece of driftwood becomes the hanger, and three to five empty shells form the moving elements below it. Each shell is threaded or tied onto cord, then given space to swing without constantly touching its neighbours. A small wooden clapper can create a firmer strike, while shells left to move freely produce a lighter chorus. The whole build can be completed in an afternoon and then tested outdoors.

Many Australian families encounter this material during ordinary weekend outings around Sydney, Melbourne, Adelaide, Perth, or a smaller seaside town. A beach walk, school-holiday trip, or visit to a community market often supplies an empty shell, a fallen twig, or a useful length of cord. Op shops are also worth checking for brass eyes, wooden offcuts, and natural cord. These familiar sources make the craft feel local and resourceful rather than dependent on a specialist shop.

Collect only what is clearly loose, empty, and permitted to take. Marine parks, Aboriginal reserves, state parks, and council areas have different rules, so read the signs at each place. Never prise living coral, occupied shells, or wood from habitat. Protected cultural objects may also be governed by the Aboriginal and Torres Strait Islander Heritage Protection Act 1988 and state or territory heritage laws. If a shell or object appears to be a significant cultural item, leave it where it is and seek advice from the land manager or Traditional Custodians.

Gather materials with care

Choose driftwood that feels solid but not dangerously heavy. A base around 25–35 cm long gives enough spread for several drops without making the chime awkward indoors. Look for dry wood with a few knots or forked points, because those features make it easy to tie on separate cords. Avoid timber treated with paint, varnish, or preservative chemicals, and do not cut from a living tree. Sea driftwood usually arrives bleached and smooth, while beach or river wood may still hold grit in its cracks.

For the shells, select empty examples with intact lips and no sharp fractures. Conches and larger spiral shells tend to produce deeper notes; smaller cockle, whelk, or clam shells can give brighter clacks. You only need three or five shells for a compact chime, so choose varied shapes rather than collecting indiscriminately. Wash food-use shells in warm water and a mild dish soap, then rinse well. For shells found outdoors, brush away sand with a soft toothbrush.

Gather waxed cotton cord or UV-resistant natural-fibre cord, a drill with a 1–2 mm bit, folded masking tape, medium and fine sandpaper, and sturdy brass screw eyes. A pebble or a small slice of driftwood can serve as a clapper. An adult should handle drilling and overhead hanging. Add a pair of safety glasses, a clamp, and a towel so the shell is supported rather than gripped tightly in one hand.

Prepare the shells and driftwood

Clean the driftwood with a stiff brush and plain water. Work along the grain to dislodge salt, sand, and hidden insects, then leave it in a dry, ventilated place. Sand rough patches with medium grit and finish with fine grit where you plan to attach an eye. Wipe it with a barely damp cloth and let it dry completely. A clean surface accepts cord more securely and shows the weathered grain that makes found wood appealing.

Find the natural hanging point in each shell. A hole already pierced near the lip needs only smoothing; otherwise choose a thick section close to the opening. Place folded masking tape over the marked spot to give the bit a little grip, clamp the shell on a folded towel, and drill slowly. If the shell shifts, stop and reassess rather than forcing it. Sand the hole until no sharp edge catches your finger or cord.

Thread the main cord through the hole and tie the shell securely by its top. For a clapper, run a separate shorter cord through the shell opening and fasten a flat wooden disc to its lower end inside the shell. As the shell rocks, the inner disc taps the wall and gives each drop a distinct note. If the opening is too narrow, omit the clapper or hang the shells in gently tapping pairs. Test each drop from the back of a chair before connecting it to the base.

Choose an arrangement that catches the breeze

The best layout depends on whether you want a soft wash of sound, distinct knocks, or a hollow resonance. Keep most neighbouring drops at least 5 cm apart; the only close pairing should be one that is meant to tap. Equal spacing can look tidy but may produce too much repeated clatter, so vary lengths slightly and place the heaviest shell near the centre. This also helps the base settle evenly.

Design Best materials Sound Make time
Simple shell drops Small empty shells hung in pairs Soft, irregular clicks 45–60 minutes
Shell with wooden clapper One shell, two cords, and a flat driftwood disc Clear hollow knock 60–90 minutes
Open-shell cluster Several spiral shells with individual inner clappers Warm overlapping tones 75–100 minutes
Driftwood mobile A forked branch, mixed shells, and varied cord lengths Layered movement and gentle rhythm 90–120 minutes

A simple shell-drop design is the easiest place to begin, especially with children: hang small shells in pairs with just enough space for a soft tap. For a more reliable individual note, use the clapper arrangement. Run a short inner cord through the shell opening and finish with a small wooden disc; as the suspended shell turns, the disc taps its inner wall. A hollow shell produces the warmest tone, while a driftwood frame gives the entire piece a sculptural shape.

Think about the site as part of the instrument. An open veranda catches coastal breezes but may expose the chime to strong gusts. A sheltered courtyard can produce a gentler sound and protect cord from harsh ultraviolet light. If the base has several short branch offshoots, tie cords to those points instead of adding many holes. For a more sculptural result, use one sturdy branch as the central support and arrange shell drops in a loose triangle beneath it.

Build with a clear materials and method checklist

Before starting, check that every shell is empty, every piece of wood is untreated, and all cord is long enough to tie twice. Lay the components on the floor in the order you will use them. This simple reset prevents a common frustration: reaching the final stage only to discover that the cord is too short or the chosen base is unstable.

Use the checklist below as a sequence rather than treating the fittings and cord as separate tasks. Drilling the base before the shells reduces handling, and attaching the hanger first makes it easier to judge how each shell hangs.

Invite a child to choose the order of the shells while an adult checks knots and weight distribution. Let the maker name each sound, move one cord at a time, and describe what changes. That small act of listening turns construction into observation and gives the finished object a personal story. Record the source of the materials so the chime also honours the place and people connected to them.

Hang it safely and let the weather shape it

Test the chime in a sheltered spot before attaching it permanently. Australian summer sun can weaken cord and dry natural fibre quickly, while salt-laden coastal winds and sudden gusts test weak knots. Cotton cord may suit a decorative indoor chime, but UV-rated line or a waxed blend is better for an exposed veranda. Replace the line when it looks fuzzy, and recheck the screw eyes every few weeks.

Keep the chime away from tree branches, power lines, balconies where people pass beneath, and doors where a sudden gust could pull it into someone. Choose a fixed hook set into a solid beam or use a purpose-made bracket rated for the weight, and have an adult handle the ladder. Outdoors, turn the shell openings downward so they do not act as cups full of rain. A porch, covered patio, or sheltered side of a house often gives the best balance of moving air and protection.

Those who enjoy making and caring for a chime often also enjoy unstructured time in a natural setting. Readers in the San Francisco Bay Area can explore that through Gaia Girls Passages’ summer camp programs, which combine outdoor learning, creativity, and mentoring for girls in day and sleepaway settings. Choose one shell, one piece of driftwood, and one afternoon this week: gather only what you may take, tie every knot securely, and listen together as the finished chime turns the breeze into sound.